Press the key briefly; the SV display will begin to flash. Use the Up ( ↑up arrow ) or Down ( ↓down arrow ) keys to adjust the target temperature. Press SET again to confirm and save the new value. Accessing Parameter Settings:
Be cautious of generic or fake manuals. Reliable sources include:
: For a thermocouple, the positive (red) wire often connects to terminal 18 and the negative (blue) wire to terminal 19 .
A standard manual for the XMTG-2000 typically includes these four critical areas: Wiring Diagram: Usually pins 1 and 2 (AC 85-242V). Sensor Input: Specific terminals for K-type thermocouples or Pt100 RTDs.
: Standard 220V AC (50/60Hz) , though some versions support a wide range of 85–264V AC . Operating Instructions