V2000-c Rfid Access Control User Manual -

If you forget the master code, power off the unit, short the specific jumper (often J2 or S16), then power it back on. The device will typically beep and flash to confirm initialization. Weatherproofing:

The V2000-C RFID Access Control is a waterproof, standalone single-door system supporting up to 2,000 users with RFID card or PIN authentication. It features an adjustable relay for electronic locks, operating on 12V DC, with programming that includes setting user cards, PINs, and access modes. For official digital copies, you can access the Obohands English Manual Download from the manufacturer's site. RFID Access Control System User Manual - uAmper V2000-c Rfid Access Control User Manual

If you wired a reed switch to terminal 7 (SEN): If you forget the master code, power off

The manual typically outlines three levels of user privilege: It features an adjustable relay for electronic locks,

You now hold the equivalent of an advanced training course for the . This user manual has walked you from the screw terminals of the relay to the logic of anti-passback and multi-card open.