| Problem | Likely Cause | Solution | |---------|--------------|----------| | Boot loop on power-up | Bad SD card or missing config.txt | Reformat SD as FAT32, ensure config exists | | Won’t detect apogee | Noisy baro data | Increase BARO_SAMPLES to 16 | | Pyro doesn’t fire | Low battery (<7V for 9V ematch) | Use a 2S LiPo (8.4V) or add a separate pyro battery | | Telemetry gibberish | Baud mismatch | Set radio module to 9600 or 57600 to match firmware |
If your firmware versions mismatch severely, client connections may drop or experience extreme latency. 2. Follow the Golden Order of Upgrades ltu-rocket firmware
Once the is successfully installed, you must configure the parameters. Connect via Mission Planner’s SiK Radio screen and set the following: | Problem | Likely Cause | Solution |
Download the latest firmware from the Ubiquiti Downloads page . Connect via Mission Planner’s SiK Radio screen and
The LTU-Rocket runs on a , chosen for its balance of processing power, floating-point unit (FPU), and radiation/ vibration tolerance. The firmware is built on a FreeRTOS kernel, allowing us to prioritize critical tasks: