Crawford Cdm9 950 Installation Manual Top ~repack~ Site

Adjust the drive unit's final position and tighten all screws. Hurð ehf. 3. Electrical Connection Cable Installation: Connect the cables between the operator and the ECS 950 control box using the "manoeuvring card" located inside the box. Lid Contacts: Ensure contacts for the control box lid are correctly connected. www.iddparts.net 4. Initial Startup and Limit Calibration Manual Positioning: Unhook the door, move it manually to approximately above the ground, and attach it to the operator. Turn on the power. Marking Reference: Mark a reference point above the floor on the door frame. Calibration Mode: on the maneuvering card.

The Crawford CDM9/950 top-loading CD mechanism demands careful mechanical alignment beyond standard CDM9 installations. Critical factors include: crawford cdm9 950 installation manual top

The Crawford CDM9/950 top-loader requires a cutout in the top panel with a minimum diameter of 120 mm for CD access. The mechanism must sit on a rigid subchassis (preferably 3–5 mm aluminum or damped acrylic) with vibration isolation. Adjust the drive unit's final position and tighten